Home Automation CMS Facades reaps dividends from Emmegi Quadra investment

CMS Facades reaps dividends from Emmegi Quadra investment

by Sophie Stevens

CMS Facades’ investment in an Emmegi Quadra L2 fully automatic cutting and machining centre in November 2018 doubled its aluminium capacity almost overnight. Two years on, the company says the payback on the machine is coming from the number of large-scale projects it is now winning.

Stephen Anderson, CMS Facades director, said: “We were the first company in Scotland to acquire a Quadra L2 and it has definitely given us a real competitive advantage when it comes to façade projects. We can now quote for projects using bigger sections than we could have done previously and we’re building an impressive portfolio of commercial and public sector installations as a result.”

When CMS initially purchased the Emmegi Quadra L2, they had already been awarded the façade contracts at CALA Homes’ The Crescent at Donaldson’s new build development in Edinburgh and at BAM’s Atlantic Square commercial office development in Glasgow.

The Quadra meant that the company could machine the 3m x 3m sliding doors and 300mm curtain wall sections required, and in timeframes up to 25% quicker than with their existing machine.

Stephen Anderson added: “The increase in capacity from the Quadra is not just about scale and volume but about throughput as well. We can now machine bigger sections up to 7.5m in length, more quickly and more accurately; and that’s proving a real selling point for both new and existing customers. We estimated payback would be within two-three years and we are certainly on target to achieve that.”

For CMS customers, the most obvious benefit of their investment comes from the fact that the Quadra L2 delivers levels of precision and accuracy on cuts and preps which are rarely possible on separate saws and machining centres where the profiles have to be repeatedly loaded and repositioned.

The Quadra L2 can cut, machine and transom notch all in one operation and machine profiles continuously in 360° without any need to reposition the bar. It automatically adjusts for different profile sizes and even different systems, so is ideal for CMS which fabricates in profiles from a number of different suppliers.

Another real positive for CMS, which was founded on a commitment to environmental sustainability, is the minimal level of wastage from the Quadra. This comes from the fact that the machine is so easy to set up and programme that there are very few operator errors.

CMS was already a loyal Emmegi customer when the team decided to purchase the Quadra, with a factory which included an Emmegi saw, router, end milling machine and crimper. The support which Emmegi delivered on the installation and commissioning of the machine and the follow up training it provided for operators and maintenance staff has strengthened the relationship still further.

Emmegi (UK)’s managing director, Ian Latimer, added: “At CMS Facades, they have definitely led the way when it comes to leveraging the maximum commercial benefits from their Quadra investment. They are achieving payback very much in line with what we predicted for this scale of operation and are impressing customers with the quality of the output which is really good news.”

www.emmegi.com www.cmswindows.com

Related Articles

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More